Protects wood from water, breathes. Protects from decay. Enhances the color of the wood and emphasizes its texture. Facilitates surface cleaning. Resistant to washing off. For interior and exterior use.
 Technical description:
 Type of material:
 Protective solution for wood.
 Color:
 Colorless
 Structure:
 Mineral oil.
 Density:
 Approximately 0.8 g / cm3.
 Application:
 Brush, clean cloth.
 Application:
 Designed for clean, untreated wooden surfaces in direct contact with human skin (shelves, headrests, back supports in baths, saunas, infrared cabins, etc.).
 Properties:
 Absorbs into wood, creating a dirt-repellent surface. Surfaces treated with the compound heat up less and are easy to keep clean. The composition is non-toxic, odorless, enhances the color of the wood and emphasizes its texture. Improves the hygiene of bath procedures.
 Substrate preparation:
 If necessary, sand the surfaces to be treated, rinse with water and dry.
 Application procedure:
 Apply the product with a clean cloth or brush and allow to soak for 10 - 15 minutes. Repeat application for highly absorbent surfaces. Remove unabsorbed products with a cloth. Heat the bath for 1 - 2 hours and wipe off the product that has come out onto the surface with a cloth.
 Cleaning tools:
 With soap and water immediately after use.
 Storage: Store in a cool, dry, frost-free place. Store opened packaging tightly sealed. Shelf life in tightly closed original packaging is approximately 12 months.
 Packing:
 0.5 l, 1 l.
 Consumption:
 Approximately 10-18 m2 / l, or approximately 100 g / m2 depending on the absorbency of the substrate. The most accurate method of setting the flow rate is a test application.
 Drying time:
 The composition is absorbed into the wood. The absorption rate depends on the density of the wood.
 Processing temperature:
 Temperature is above 5 0C, relative humidity is below 80%.
 Precautions:
 Do not empty into drains, water reservoirs or onto the ground.
 Disposal:
 According to local regulations.