top of page

For gluing products from various materials. Transparent after drying. When introduced into chalk and gypsum solutions, it improves their properties. Does not contain organic solvents. For interior work.

Technical description:

Type of material:

Universal adhesive based on polyvinyl acetate dispersion (PVA) for gluing various materials.


Water, polyvinyl acetate dispersion, functional additives, preservative.


Milky white, colorless upon drying.


Approximately 1.0 g / cm3.


With a brush, roller, spatula.


Kaizer brand PVA universal glue is designed for gluing in any combination: paper, cardboard, leather, fabric, wallpaper, and wood.

PVA universal glue can be used to modify the properties of chalk and gypsum mortars by adding it to the water used to prepare the mortar. For interior work.


White, transparent when dry. The glue joint can withstand temperatures from -30 ° C to + 80 ° C. When added to chalk and gypsum mortars: improves the plasticity and adhesion of the mortar during application, and also increases the strength and elasticity of the material after drying.

Substrate preparation:

The surface must be dry and sound. The surfaces to be glued must be cleaned of old peeling coatings, dirt, dust, grease and other substances that reduce adhesion. Sand shiny surfaces.

Application procedure:

Mix. Apply a thin layer on one of the bonded surfaces at the temperature of the glue, ambient air and base above +10 0С.

When added to chalk and gypsum solutions, Kaizer brand PVA universal glue is mixed with water, which is used to prepare solutions:

Chalk whitewash: 1:10 - 1:20.

Plaster, putty: 1-5 mm thick - 1: 5, 5-20 mm thick - 1:10.

Cleaning tools:

With water, immediately after use. Remove dried adhesive mechanically.


The guaranteed shelf life is 12 months from the date indicated on the package. Store and transport in original hermetically sealed containers at temperatures from +5 0С to + 35 0С.

Protect from moisture, heating devices and direct sunlight.


1 l, 5 l, 10 l.


Approximately 150-200 g / m2, depending on the absorbency of the substrate. The most accurate method of setting the flow rate is a test application.

Drying time:

Paper, cardboard - 3 min. Wood, fabrics, leather - 5-6 hours at a temperature of +20 ° C and a relative humidity of 80%. The glued wood is ready for use in 24 hours.

Processing temperature:

+ 5 ° C minimum for substrate and atmosphere during processing and drying.


Follow the general rules of occupational health. Work in work clothes, gloves. Keep out of the reach of children. In case of contact with eyes or skin, rinse with water, if necessary consult a doctor. The glue is non-toxic.


Dispose of dried adhesive and containers as household waste in accordance with local regulations.

Universal glue PVA Standart. PVA universal

0.8 Kilograms
    Логотип с белым фоном.png

    Наш адрес: Алматы, ул. Спасская, 68. Лакокрасочный завод Kaizer.  

    • 8 (701) 032-83-15

    bottom of page