top of page

Deep penetration sanitizing primer, concentrate 1: 4. Protects the surface from the growth of mold and algae. Strengthens the foundations. Reduces and evens out the absorption of the surface.

Technical description:

Product type:

Anti-mold strengthening water-dispersive concentrate primer. For priming porous, unevenly absorbent substrates subject to constant exposure to moisture before painting with latex paints, ceramic tiles, wallpapering, puttying.

For interior work. Kaizer brand Sanier Grundharter 1: 4 primer is a means of preventing the appearance and growth of mold and mildew under the finishing layer of finishing materials.


Water, synthetic acrylic dispersion, biocide, additives, preservative.


Milky white, colorless after drying.


Approximately 1.0 g / cm3.


By brush, roller, or airless spray (nozzle 0.021 to 0.026 inches or 0.523 to 0.66 mm; pressure 8-10 bar; spray angle 40-80 °).


Recommended areas for processing: bathrooms and showers, kitchens, closets, cellars, laundries, etc. Surfaces to be treated: concrete, aerated concrete, plaster, putty, brick, gypsum plasterboard, fiberboard, chipboard, etc. Well suited for food and beverage workshops, poorly ventilated and explosive environments as it does not emit solvent vapors. A primer and hardener for crumbling substrates, as well as for leveling the different absorbency of the surface.


Penetrates deeply, strengthens the base, reduces water absorption, prevents the growth of mold and mildew, evens out the absorbency of the surface, reducing the consumption of finishing materials. Increases the strength of the surface layer, improves the adhesion of finishing materials to the base. Has a slight odor. Vapor permeable.

Substrate preparation:

The surface must be dry and sound. Clean the surface from old peeling coatings, dirt, dust, grease and other substances that reduce adhesion to the base. The surfaces contaminated with mold (fungus) should be pre-treated with the specialized fungicidal compositions "Sanierlosung" of the Kaizer brand in accordance with the instructions for its use.


Compatible with all Kaizer dispersion paints and synthetic renders.

Application procedure:

Stir before use. Dilute the primer concentrate with clean cool water. It is not recommended to use undiluted primer concentrate. Normally absorbent substrates are primed with Sanier Grundharter 1: 4 Kaizer, diluted 1: 4 with water. Highly absorbent substrates are treated with diluted water in a 1: 2 or 1: 3 ratio with Sanier Grundharter 1: 4 Kaizer primer, if necessary in 2 coats wet on wet.

The primer must not form a shiny film on the surface.

Cleaning tools:

With water, immediately after use.


In a cool and dry place, protected from frost. Store opened packaging tightly sealed. Storage stability in tightly closed original packaging is approximately 12 months.


1 l, 5 l, 10 l.


Smooth plastered surfaces: approx. 100 ml / m2, Medium granulation plaster: approx. 150 ml / m2, Coarse plaster: approx. 200 ml / m2

For the most accurate calculation of the consumption in each specific case, it is recommended to carry out a trial priming at the facility.

Drying time:

In warm, dry air on the ground, you can paint on the same day, in cooler and damp air, respectively later.

Processing temperature:

+ 5 ° C minimum for substrate and atmosphere during processing and drying.


Irritating. We ask you to observe the following recommendations: Exclude the access of children to the substance. Use personal eye and skin protection. Work in a ventilated area, wearing work clothes, gloves. Do not breathe vapor when spraying. Ensure sufficient air intake during processing and drying. In case of contact with skin or eyes, rinse immediately with plenty of water. Do not empty into drains, water reservoirs or onto the ground.


According to local regulations.

Sanitizing primer concentrate - SANIERGRUNDHARTER 1: 4

1 Liter
    Логотип с белым фоном.png

    Наш адрес: Алматы, ул. Спасская, 68. Лакокрасочный завод Kaizer.  

    • 8 (701) 032-83-15

    bottom of page