Concrete primer - a primer for concrete floors and cement screed. Strengthens the foundations. Reduces and evens out the absorption of the surface. Strengthens the adjoining ability. Resistant to washing off. Ready to use.
 Type of material:
 Concrete primer: a reinforcing deep-penetrating primer for indoor use on concrete floors and cement screeds.
 Structure:
 Water, synthetic acrylic dispersion, additives, preservative.
 Color:
 Milky white, colorless upon drying.
 Density:
 Approximately 1.0 g / cm3.
 Application:
 By brush, roller, airless spray (nozzle 0.021 to 0.026 inches or 0.53 to 0.66 mm; pressure 6-8 bar; spray angle 40-80 °).
 Application:
 Well suited for food and beverage workshops that are poorly ventilated and subject to explosion hazard as it does not emit solvent vapors. A primer and hardener for concrete floors, as well as for leveling the different absorbency of the surface.
 Properties:
 Excellent penetrating power. It strengthens impregnated substrates very well. Strengthens adhesion, permeates air vapors, resists alkalis. Dries quickly and is practically odorless.
 Substrate preparation:
 The concrete surface must be dry and cured for at least 4 weeks.
 Compatibility:
 With all Kaizer dispersion paints and synthetic renders.
 Application procedure:
 A high firming effect is achieved by applying generously with a brush or brush. Prime highly absorbent substrates until full wet-on-wet without thinning.
 Cleaning tools:
 With water, immediately after use.
 Storage:
 In a cool and dry place, protected from frost. Store opened packaging tightly sealed. Storage stability in tightly closed original packaging is approximately 12 months.
 Packing:
 1 l, 5 l, 10 l.
 Consumption:
 Approximately 150 g / m2, depending on the absorbency of the substrate. The most accurate method of setting the flow rate is a test application.
 Drying time:
 In warm, dry air on the ground, you can paint on the same day, in cooler and damp air, respectively later.
 Processing temperature:
 + 5 ° C minimum for substrate and atmosphere during processing and drying.
 Precautions:
 We ask you to observe the following recommendations: Exclude the access of children to the substance. Do not breathe vapor when spraying. Ensure sufficient air intake during processing and drying. In case of contact with skin or eyes, rinse immediately with plenty of water. Do not empty into drains, water reservoirs or onto the ground.
 Disposal:
 According to local regulations.