Ready to use. Unique decorative effect of concrete. The possibility of creating interiors in the "Loft" style. Does not contain solvents. Economical. Easy to apply to the substrate. Non-toxic, has a neutral odor. For interior work. Environmentally friendly product.
 Technology of use
 1 layer - Base
 2nd layer - Deep penetration impregnation primer
 3rd layer - Putty
 4th layer - Quartz soil
 5 layer - Decorative plaster
 Technical description:
 Type of material:
 Decorative acrylic plaster allowing to simulate various concrete textures.
 Structure:
 acrylic copolymer dispersion, filler, pigment, functional additives, water
 Color:
 Grey
 Application:
 Metal spatula, roller.
 Application:
 Ready-to-use plaster for simulating various concrete textures. Unlike natural concrete, it has a wide variety of decorative effects and easy application.
 Reasons:
 New or previously painted surfaces: concrete, gypsum, plasterboard, cement, brick, chipboard, fiberboard. Substrates must be clean, dry, smooth and even. Substrates should be primed first with Kaizer Kaizer Putzdgrundharter 1: 4 and then Kaizer Quarzgrund to roughen the surface and adhere the plaster to the substrate.
 Operating procedure:
 Stir the plaster thoroughly before use. Apply plaster to the prepared substrate with a stainless steel trowel or trowel. Use a textured roller or foam sponge to form a pattern, let it dry for 10-15 minutes and smooth the tops of the pattern with a spatula. You can apply a second layer of plaster in the form of uneven strokes and smooth out the same way. Smoothing is carried out with pressure, and then after almost complete drying with a clean stainless steel trowel, polish the surface of the coating to achieve the effect of a polished stone.
 Drying time:
 At an air temperature of + 20 ° C and a relative humidity of 65-75%: 2-4 hours - resistance to touch (you can apply a second layer). Dry completely after 48 hours (further materials can be applied).
 Processing temperature:
 Not lower than +15 ° C for the substrate and +18 ° C in the atmosphere during application.
 Consumption:
 about 1.2-1.5 kg / m2 in two coats, depending on the substrate and the thickness of the application. The most reliable method for accurately setting the flow rate is a test coating.
 Cleaning tools:
 Wash immediately after use with water and detergents.
 Storage:
 Not lower than +5 ° C
 Packing:
 1 kg, 8 kg, 15 kg
 Disposal:
 According to local regulations.
 Precautions:
 Keep out of reach of children. In case of contact with eyes, flush with plenty of water. Do not empty into drains.