top of page

Glossy dispersion paint for exterior and interior use. Antibacterial. Resistant to abrasion. Super washable.

Type of material:

Silky matt, water-based acrylate paint for an abrasion resistant finish for indoor and outdoor use. Prevents the appearance of bacteria, i.e. no special biocidal additives are required. Ideal for painting rooms that require constant sanitary cleanliness and sterility, such as kindergartens, hospitals, surgical rooms. In rooms with high or variable humidity, it does not support the formation of mold and mildew. Ideal for use on fiberglass, coarse fiber and textured wallpaper, concrete, plaster and plaster surfaces, metal surfaces, etc.

Color:

White.

Gloss level:

Silky-glossy.

Structure:

Water, synthetic acrylic dispersion, titanium dioxide, fillers, additives, preservative.

Density:

Approximately 1.3 g / cm3.

Application:

By brush, roller, airless spray (nozzle 0.026 to 0.031 inches or 0.66 to 0.79 mm; pressure 6-8 bar, spray angle 40 - 80 °).

Properties:

Resistant to repeated abrasion and washing with chemical detergents, durable, that is, it has a long service life. Has elasticity, withstands elongation up to 50%. Does not contain solvents. Convenient in processing, high hiding power, easy to clean. Very economical. Forms durable silky-glossy surfaces, lightfast. It has good vapor permeability, that is, it allows the base to "breathe".

Substrate preparation:

The paint can be applied to all solid substrates, they must be clean, dry and hard. Old glue whitewash must be completely removed. Prime fresh cement-based plaster and repaired areas. Treat intensely moisture-absorbing and chalky surfaces with Kaizer Tiefgrund LF, Kaizer Putzgrundharter 1: 4 for gypsum plaster.

Painting procedure:

1st (priming) coat: thin the paint with a maximum of 10% water.

2nd (final) coating: do not thin if possible.

When painting, make sure that the material is applied evenly.

Coloring:

Any water-dispersive color of the Kaizer brand.

Cleaning tools:

Rinse with water immediately after use.

Storage:

In a cool and dry place, protected from frost. Store opened and incompletely used containers tightly closed. Shelf life in the original packaging of the manufacturer is 12 months.

Packing: 1kg, 5kg, 10kg

Consumption:

130 g of paint is sufficient for approx. 1 m2 in one coat on a smooth surface; variations may occur depending on the quality of the substrate. On rough surfaces, fiberglass, respectively, more, approximately 180-200g / m2.

The most reliable method of accurately establishing the flow rate is a test painting.

Drying time:

At room temperature + 20 ° C, re-coating is possible on the same day after 2-3 hours. At cool temperatures, the drying time increases accordingly 6-8 hours. Complete drying and load-bearing capacity occurs after 27 days.

Processing temperature:

+ 5 ° C minimum for substrate and atmosphere during application and during drying.

Disposal:

According to local regulations.

Precautions:

Keep out of reach of children.

In case of contact with eyes, flush with plenty of water.

Do not empty into drains.

Special sanitizing enamel paint. "Plastik Farbe Sanier"

₸2,505.00Price
1 Kilogram
    Логотип с белым фоном.png

    Наш адрес: Алматы, ул. Спасская, 68. Лакокрасочный завод Kaizer.  

    unnamed.png
    • 8 (701) 032-83-15

    bottom of page